CANABLAST means abrasives. Since cabinets and blastrooms require lightweight reclaimable media, the most commonly used abrasives are glass beads and aluminum oxide. Contact us today and let us show you our competitive pricing and our wide inventory.

 

Applications

§    Surface preparation for bonding

§    Removing excessive flash left from molds

§    Removing brazing residue

§    Removing scale from castings

§    Peening and stress relieving

§    Cleaning High Pressure Welded parts

 

Sandblast media glass beads

A popular media used primarily for dimensionally sensitive applications where tolerance and finish are your main concerns. Perfect for removing medium to light contamination without causing dimensional change, over-stressing, imbedding or pitting. Used widely by automotive rebuilders, die and mould makers on the plating and aerospace industries. The following are some typical applications:

 

Coarse

Good for cleaning heavier contamination and peening for stress.

 

Med. Coarse

Good for engine rebuilding, mould texturing and peening of softer metals.

 

Medium

Good for plating, anodizing preparation and most general applications.

 

Fine

Good for cleaning light contamination and wherever a fine surface finish is desired.

 

 

Glass Beads

Description

 

635003            

20-30 US Screen (Coarse)

-

635004            

30-40 US Screen (Coarse)

-

635005            

40-50 US Screen (Coarse)

 

635021            

40-60 US Screen (Med. Coarse)

 

635022            

40-80 US Screen (Med. Coarse)

 

635006            

50-70 US Screen (Med. Coarse)

 

635023            

50-80 US Screen (Med. Coarse)

 

635024            

60-100 US Screen (Med. Coarse)

 

635007            

70-80 US Screen (Medium)

 

635008            

70-100 US Screen (Medium)      

 

635009            

80-120 US Screen (Fine)           

 

635010            

100-170 US Screen (Fine)

 

635012

140-230 US Screen (Fine)         

 

635013            

170-325 US Screen (Fine)

-

 

 

Aluminum oxide

Highly aggressive abrasive Ideal for applications where tough contamination is encountered and surface removal of .0005 to .08 inches is acceptable. Resulting finish is ideal for painting, plating and coating.  Grit sizes range from #12 (coarse) to #240 (fine).

 

 

Aluminum Oxide

Description  

 

635100

40 Grit (Coarse Special)

-

635101

16 Grit (Coarse)

-

635104

24 Grit (Coarse)

 

635105

20 Grit (Coarse)

 

635106

36 Grit (Coarse)

 

635107

46 Grit (Med. Coarse)

 

635108

30 Grit (Coarse)

 

635109

54 Grit (Med. Coarse)

 

635110

60 Grit (Med. Coarse)

 

635114

70 Grit (Medium)

 

635118

80 Grit (Medium)

 

635120

90 Grit (Medium)

 

635122

100 Grit (Med. Fine)

 

635125

120 Grit (Med. Fine)

-

635131

150 Grit (Med. Fine)

 

635135

180 Grit (Fine)

 

635141

220 Grit (Fine)

 

 

 

JetMag (synthetic olivine pyroxene sand)

The only true substitute to sand (silica), JetMag offers excellent sanding quality and is cost/performance ratio is highly competitive. It allows faster cleaning and reduces consumption, therefore it offers greater productivity in enclosed work places.  Because of its chemical and mineral composition, JetMag is a non-toxic material and environment friendly.  Less than 1 % free silica.

 

 

JetMag

Description  

 

635202

16-60 US Screen (Coarse)

-

635203

30-60 US Screen (Coarse)

-

635204

35-70 US Screen (Med. Coarse)

 

635205

120-150 US Screen (Fine)

 

635207

32 Grit (Coarse)

 

 

** Steel Grit and Steel Bead also available

 

All abrasives are sold in 50 Ibs. bags.

 

Other grades of abrasives also available.

 

 

Top of page

 
Home | Products | Contact

Copyright © Canablast, 2003.